Indiscriminately for tables murals or central and as applications, we have a wide range of materials for its implementation in them.
Types and dimensions:
The forms and ultimate dimensions are carried out in accordance with the customer specifications or adaptation to the distribution in plant that required for each project.
The work tops can be plain or with drilling for hand batteries, pools and taps.
• Dry Surfaces: without holes.
• Surface wet: with specific drilling.
Peripheral edging
When needed two or more plates to form a cover only used parts with ridge in all its contour, except in the sides of union of the plates.
Construction
The covers of officers are built in accordance with the quality criteria of the standard DIN 12916, relating to materials used, tolerances dimensional and finishes of edges and corners.
CHARACTERISTICS OF THE WORK TOPS
Post-formed laminate Tops
The support is a panel of water-repellent particles 30 mm. thick. The cladding of this material is laminated, highly resistant to chemicals and 0,8 mm. thick.
Post-formed front with single or double curve.
Various colours.
Compact Resin Tops
Solid slab based on thermostable synthetic resins, homogeneously reinforcedwith cellulose fibre, perfectly polymerised troughout its thickness. This material is unaffected by moisture, rssistant to absorption, acids, bases and solvents. Two different qualities are offered in this material type: acid-resistant and finished acrylic polyurethane.
Thickness of 13-18 mm. in compacted resin.
Chamfered front or with peripheral edging.
Terra cotta tile Tops
Terra cotta tiles of 20 and 32 mm. thickness with peripheral edging in glazed tiles enamelled at 1200ºC and with Mohs-8 hardness, with a tolerance of 1% in flatness over the length of the top (DIN 180155) and length and width dimensional tolerance of ±2 mm. per tile.
Enamelled flat front.
Front with peripheral edging of the same piece.
Adjoining edging in ABS in the 20 mm. tops.
Various colours, normally white.
Stainless steel Tops
Formed from a sheet of AISI304 stainless steel of 1 mm. in thickness and mounted on a water-repellent panel of 30 mm.
The rear part of the top can have continuous fold as decorative coping of 60 mm. in height.
Smooth front oversized to 30 mm.
Front with peripheral edging of the same material.
Tempered glass Tops
Cover of tempered glass 6 mm. thick, light blue in colour, on a panel of water-repellent particles of 25 mm. Joints of acid resistant white-coloured mastic.
Flat front with polypropylene profile of 3 mm. in thickness
Front with peripheral edging of epoxy resin.
Granite Tops
Natural stone of high mechanical strength and chemical resistance (inorganic products) in a veined white colour, polished finish and rounded edges. Mounted on water repellent conglomerate board of 16 mm.
20 mm. thick with front thickened to 40 mm.
Flat front.
OPTION:
Synthetic Granite
Polypropylene Tops suitable for large chemical attacks
