The furniture is designed for the maximun ease of installation, as well as for eventual changes in the laboratory layout, allowing any type of installation and equipment. This model increases the equipment possiblities by allowing its composition to be easily changed.
.: Wall Fitting Benches MULTIPLO ®
Estructure formed by legs whose design in square section and made of cold-laminated steel of 30x30 mm. section gives high mechanical strength. These legs are joined together from behind by a strap and by a resin moulding at the front.
• levelling system with high load bearing capacity.
• Covered in blue epoxy paint RAL 5015.
• Modules of 600, 900, 1.200, 1.500 and 1.800 mm.
• Weights of 500, 750 and 900 mm.
Rear connecting, forming a services gallery for eventual system maintenance.
Shelf column. Constructed from steel section covered with epoxy resin paint.
• Column with a shelf height of 570 mm.
• Twin columns of 955 mm. with two shelves of adjustable height.
• Several types of single, double or storage shelves can be installed at any height.
• A service panel is located beneath the lower shelf for all kinds of fluid installation.
• Optionally a service panel can be fitted with PVC conduit for the assembly of electrical equipment or telephone and data lines.
Shelves. Formed from a metal framework painted with epoxy resin paint and a body in melamine wood fitted inside.
.: Central Benches MULTIPLO ®
Comprising two wall benches joined together back to back, which leaves a generous service gallery.
• Modules of 1.200, 1.500 and 1.800 mm.
• Heights of 750 and 900 mm.
• Versions with single or double shelves similar to those described in the wall-fitting benches.
• Multiple combinations:
- with sink unit at head of bench. - with wall-fitting benches linked in "L", "U" shape, etc.
.: Special Benches MULTIPLO ®
Our technical department will developed the optimum solution for any type of surface in various working areas:
• Installations for physics and chemistry (bus-bars).
